![]() I need a modified BIOS and EC Firmware for the MSI GT60 2OC laptop (Product. You need to machine the IHS and add thermal couples in order to measure Tcase. SSAO is on, Unlimited Video Memory is on. Tcase is listed as 64☌ but remember this isn't the temperature that is reported when using a utility, it's the temp of the heat spreader which will always be cooler than the reported temp. 80☌ is when Intel would normally start thermal throttling so I'm gonna say your temps are more than safe. ![]() Since I don't get that hot in normal work loads I don't see an issue. My temps are basically the exact same as yours, if I use Prime95 it goes up to 80☌ but I haven't had any thermal crashes yet. Anyway, after one unsuccessful overclock (BSOD) at 4,7Ghz with 1200V, I changed the voltage to 1235V and using intel extreme tuning utility I've done a 4h CPU stress test without getting a single crash. You only need to mess with the voltage once you start getting crashes but still want to increase the clock speed. ![]() I didn't touch the voltages specifically but there's a "+ offest" I turned on and it's been working fine. ![]() I used the bios to overclock, kept the base at 100mhz and set the multiplier to 4.5 so I get 4.5ghz on all cores. I also have a 6600k and a 212 Evo, along have a z170a motherboard from Asus. ![]()
0 Comments
Leave a Reply. |